A Novel Control Unit for a Friction Welding Machine Based on Computer

Typical friction welds are made by holding a non-rotating sample in contact with a rotating sample under constant or gradually increasing pressure until the interface reaches the welding temperature and then stopping pressure rotating to complete the weld. This process requires additional time and is labor intensive. Recently, several control systems have been introduced to the industry for improving the welding process such as conventional automatic control, microcontroller control, and Programmable Logic Controller (PLC). However, these processes have limitations either on materials selection or on visualization. In this study, continuous monitoring, control and recording are implemented. Computer-controlled platform for the simulation and control of mechanisms is based on a Microsoft Visual Basic environment. Welding parameters such as friction time, forge time and breaking time are entered with a keyboard and can be saved and used again. To show the feasibility and versatility of the study, the evaluation is used for sample joining. It has been observed that this system works successfully and gives good performance.     

Seventh-order elliptic video filter with 0.1 dB pass band ripple employing CMOS CDTAs

In this paper, a CMOS realization of the current differencing transconductance amplifier (CDTA) is given, which is a newly reported active building block for current-mode signal processing. Current differencing stage of the CDTA element is realized using a differential current-controlled current source and in the output stage, floating current sources are used to convert intermediate voltage of z terminal to output currents. Due to the compactness of the circuit, it is capable of high-frequency operation and suitable for video signal-processing applications. The CDTA element is used in a current-mode anti-aliasing video filter, which is designed using operational simulation of a seventh-order passive elliptic filter, so the resulting active filter has the low sensitivity feature of its passive counterpart. The filter has 0.1 dB maximum pass band ripple as imposed by ITU video anti-aliasing filter standard. SPICE-simulation results of both the CDTA element and the seventh-order elliptic filter are given. Simulation results are found in close agreement with theoretical results.     

Effect of TiO<Subscript>2</Subscript> addition on crystallization and machinability of potassium mica and fluorapatite glass ceramics

In this study, the effect of TiO₂ addition as a nucleating agent on the crystallization and machinability of potassium mica and fluorapatite base glass ceramics were investigated. Glass compositions were prepared and casted at predetermined temperatures. Differential thermal analysis and XRD methods were applied to characterize phase precipitation sequence and identification of phases. Disc and cylindrical shaped samples were prepared to determine microstructural and mechanical properties in terms of microhardness and machinability. FEG-SEM was used to characterize variation of microstructural constituents depending on the amount of nucleating agent. The results indicate that optimum microstructure and machinability can be obtained in machinable glass-ceramic by the addition of 1 wt% TiO₂ for the composition having 3:7 weight ratio of fluorapatite to potassium mica.     

Using multiplicative neuron model to establish fuzzy logic relationships

Determination of fuzzy logic relationships between observations is quite effective on the forecasting performance of fuzzy time series approaches. In various studies available in the literature, it has been seen that utilizing artificial neural networks for establishing fuzzy relations increase the forecasting accuracy. In this study, a novel high order fuzzy time series forecasting approach in which multiplicative neuron model is used to define fuzzy relations is proposed in order to reach high forecasting level. Also, particle swarm optimization method is utilized to train multiplicative neuron model. In order to show forecasting performance of the proposed method, it is applied to a well-known data Taiwan future exchange and the results produced by the proposed approach is compared to those obtained from other fuzzy time series forecasting models. As a result of the implementation, it is observed that the proposed approach gives the best forecasts for Taiwan future exchange time series.     

Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers

This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture bases (HCS and APS). Bond strength was tested in tension according to ADA specification No.15. The results showed that the HC group failed cohesively because of higher interface bonding (49.95 MPa) compared with those of the others (AP: 25.41 MPa; MC: 22.06 MPa; MI: 20.02 MPa). The application of dichloromethane improved bond strengths of HCS and APS groups (60.61 and 32.03 MPa, respectively). It was suggested that dichloromethane could be applied on the denture teeth ridge lap area prior to denture base processing to enhance adhesion between the tooth/resin.     

An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover,strength and corrosion level

The effect of corrosion on the bond strength between reinforcement bars and concrete was studied in a series of experiments. An accelerated corrosion method was used to corrode the reinforcement bars embedded in concrete specimens. Pullout tests were performed to develop an empirical model for the ultimate bond strength by evaluating bond strengths in two different concrete mixes, three concrete cover depths and different mass losses of reinforcement bars after corrosion. Bond-slip relationships for the different corrosion levels were compared. It was found that the relationship between bond strength and concrete strength in uncorroded specimens differed from that of corroded specimens set in high-strength concrete because of brittleness in the corroded specimens, which caused a sudden loss of bond strength. The results revealed that specimens with higher concrete strength levels and corroded reinforcements showed a higher percentage of bond strength degradation due to concrete cracking during the pullout tests.     

The impact of a realistic packet traffic model on the performance of surveillance wireless sensor networks

It is quite common to see that classical periodic or Poisson packet traffic models are used for evaluating the performance of wireless sensor networks (WSNs). However, these models may not be appropriate for modeling the data traffic resulting from a particular application. Furthermore, they may be overestimating the performance of a WSN. In this paper, we show the significance of using a realistic and application-specific packet traffic model by comparing the performance of a well-known WSN protocol under the Surveillance WSN packet traffic model (SPTM), as well as under periodic and binomial traffic models. A packet traffic framework specific to surveillance applications is proposed which is then used for deriving SPTM analytically. In order to be adaptable and flexible, SPTM incorporates a probabilistic and parametric sensor detection model. Simulation results show that to employ an application-specific packet traffic model has significant impact on the performance evaluation of the WSN and ordinary traffic models may overestimate the capacity of the WSN.     

Impacts of impregnation with Imersol-Aqua on the compression strength of some solid wood materials

The aim of this study was to investigate the effects of impregnation with Imersol-Aqua on the compression strength of some solid wood materials. For this aim, Oriental beech (Fagus orientalis Lipsky), European oak (Quercus petrea Liebl.), Scotch pine (Pinus sylvestris Lipsky), Uludag fir (Abies Bornmülleriana Mattf.), Oriental spruce (Picea orientalis Lipsky) and Lombardy poplar (Populus nigra Lipsky) wood samples were prepared according to TS 2595 and impregnated with Imersol-Aqua, commonly being used in construction wood materials by the method of short, medium and long-term of dipping according to ASTM D 1413 and producers’ definition. After the impregnation process, compression strength was measured according to TS 2595. Consequently, among the non-impregnated wood materials, the highest compression strength was obtained in beech and pine samples. Compression strength at this situation from the highest to lowest can be enumerated beech, pine, oak, spruce, fir and poplar. With regard to the impregnation period, the sequence form the highest to lowest was as long-term, medium-term and short-term dipping. In the interaction of wood material and impregnation period, the highest compression strength values were obtained in Scotch pine (71.220 N mm⁻²) impregnated with long-term dipping method whereas the lowest in Lombardy poplar (35.710 N mm⁻²) impregnated with short-term dipping method.

In consequence, in the massive constructions and furniture elements that the compression strength after the impregnation is of great concern, long-term impregnation of solid wood material could be recommended.